(50) United States patent number 4021092 was assigned to today's Perma- Link® plugs and connectors which are classified among the most rugged and safest wiring devices available. Utilize a two-screw cable clamp. Perma-Link® plugs and connectors are designed to provide many years of trouble-free service in the most demanding industrial and construction environments.
UL Listed and CSA Certified.
Two-screw cable clamp secures wire and provides strain-relief.
Solid brass blades for optimum electrical and mechanical performance.
Keyed body and cover for easy alignment/assembly.
Molded-in non-slip finger-grips makes devices easy to assemble and handle.
Withstand high impact, corrosion, oils, greases, ...
(32) Ericson's Medium Grade Industrial Perma-Grip® cord grip wiring devices provide a line of incredibly tough hard use jobsite devices for your own cordsets that stand up to the most demanding industrial and construction environments.
UL Listed and CSA Certified.
Water/mud/dust resistance provided by safety compression cord grips.
Keyed body and cover for easy alignment/assembly.
Color coded rubber cord-seal bushings accommodate a wide range of cable diameters.
Molded-in non-slip fingers grips makes devices easy to assemble and handle.
Withstand high impact, corrosion, oils, greases, solvents and other chemicals across -20 °C - +65 °C.
(52) Perma-Tite® 2 plugs and connectors are engineered and manufactured to the highest quality standards to provide the ultimate in electrical service and protection. They are designed and proven to do their best under the worst conditions in a broad array of the most severe food processing, industrial, marine, construction and petro-chemical work environments.
UL Listed & CSA Certified
Tongue and groove sealing system provides environmental protection of :
NEMA Type 4, 4X, 6, 6P & IP67
Devices resist high-pressure hose down of 1000 psi.
Plug and Connector bodies made with PBT chosen for its high resistance to moisture absorption, high voltage arcing and carbon tracking.
(18) Ericson's Smart Monitor line of cord connected wiring devices help employers comply with OSHAs Assured Equipment Grounding Conductor Program (AEGCP) - OSHA 1926.404 (b) (1) (iii). Ericson products monitor the line side requirements of OSHAs AEGCP, which represent approximately 85% - 90% of the total program requirements. Smart Monitor plugs and connectors are designed to provide many years of trouble-free service in the most demanding industrial and construction environments.
ETL and CETL Listed
Available in Perma-Link® , Perma-Grip™ or Perma-Tite2™ styles.
Built-in module automatically and continuously monitors ground continuity and wiring conditions. ...
Ericson's line of Hospital Grade Plugs and Connectors offer long-life rugged design in a standard institutional white and grey color pattern. Available in either clear see-through housing or our rugged rubberized grip device. Tested for ground pin retention, ground resistance, face impact, ground temperature contact, line blade retention and abrupt removal.
UL Listed and CSA Certified.
Green dot marked and certified
Two color schemes - Grey body or clear ( see part numbers)
Two-screw cable clamp secures wire and provides strain-relief.
Solid brass blades for optimum electrical and mechanical performance.
(4) This Non-NEMA configuration, commonly called the "crowsfoot", is widely used in critical applications that require equipment be plugged into a specific electrical system to ensure proper function or to prevent equipment damage.
Ericson’s Safety yellow extension cords feature a lighted connector* that illuminates when there is power present. The light is visible through the clear molded connector end of the cord. The single-tap (NEMA 5-15 and L5-20) and Tri-tap (5-15) extension cords are made from Heavy-Duty #12/3 SJTW cable and are available in 50 ft. and 100 ft. lengths. Great for contractors. Each extension cord is packaged in a full-color cardboard sleeve which makes them ideal for merchandising.
* L5-20 Locking cordsets (PN 123BL & 123DL) do not have lighted ends. Molded black ends only.
Ericson "Y" cordsets offer the flexibility of two outlets from one source so you can keep two tools plugged in cutting down on receptacles required on the jobsite. Made from heavy-duty #12/3 STW 600V Hard Service yellow cable with molded-on plug, connector and Y-junction. Works with GFCI protected circuits. Lighted ends indicate power on some models. Straight 5-15 and locking L5-20 available.
Ericson's Light Industrial Cordsets made with attached Perma- Link® plugs/connectors & SOW cords are the best in the industry for long life, rough service use on the jobsite. Utilizing a two-screw cable clamp design, the Perma-Link® plugs and connectors are designed to provide many years of trouble-free service in the most demanding industrial and construction environments.
UL Listed and CSA Certified.
Two-screw cable clamp secures wire and provides strain-relief.
Solid brass blades for optimum electrical and mechanical performance.
Rubber-feel keyed body and cover for easy alignment/assembly.
(135) Ericson's Medium Grade Industrial Perma-Grip® Cordsets made with Perma-Grip wiring devices provide a line of incredibly tough hard use jobsite cordsets that stand up to the most demanding industrial and construction environments.
UL Listed and CSA Certified.
Water/mud/dust resistance provided by safety compression cord grips.
Keyed body and cover for easy alignment/assembly.
Color coded rubber cord-seal bushings accommodate a wide range of cable diameters.
Molded-in non-slip fingers grips makes devices easy to assemble and handle.
Withstand high impact, corrosion, oils, greases, solvents and other chemicals across -20 °C - +65 °C.
(135) Ericson's Extreme Conditions Heavy Duty Industrial Perma-Tite2® Cordsets made with Perma-Tite2 all-weather, water-tight wiring devices provide a line of incredibly tough hard use jobsite cordsets that stand up to the most demanding industrial and construction environments.
UL Listed and CSA Certified.
Extreme NEMA 6P Rated Cordset Plugs & Connectors
Seal tight design hold out hose and submerged liquids
Great for food processing wash-down
Great for Petro-Chem sites, too
Water/mud/dust resistance provided by safety compression cord grips.
Keyed body and cover for easy alignment/assembly.
Color coded rubber cord-seal bushings accommodate a wide range of ...
Ericson manufacturers the highest quality molded industrial strength "Y" and "W" cordsets to help divide power on the jobsite for increased capabilities with temporary power distribution.
Provides multiple outlets from a single power source.
Available in "Y" and "W" configurations.
Manufactured using heavy-duty SEOW cord.
Standard models available with 18" primary and secondary.
Available with Ericson's Perma-Link, Perma-Grip or Perma-Tite2 (Extreme Conditions) plugs and connectors.
Custom configurations available with your choice of primary length, secondary length and plug/ connectors.
125/250V 50 Amp 4W cordsets for Oscar box series. 50 Amp receptacle (SR-50) is a ready to install in a panel with 24 inch #6AWG wires prewired into the CS6369 4W receptacle under an all weather flip cover. Mounting nipple and lock nuts included.
50 Amp cordsets come in SOW and STW grade cords
Standard with CS 6365-P plug (male) ends and CS6364-C (female) connector ends
(35) Perma-Link® 50 Amp Locking Plugs and Connectors Ericson's 50 Amp plugs and connectors incorporate the latest technologies to provide wiring devices that are safer, faster to wire, lighter and easier to identify. These devices are available as plugs, connectors, inlets and receptacles and are available in 3 and 4 wire configurations.
The innovative merchandising tool from Ericson Manufacturing Company.
Products that Sell -
Each 1447PRK holds 20 Ericson 15A/120V Straight blade Plugs (1510-P) and Connectors (1610-C) that feature the exclusive safety screw-down cable clamp that provides quick field assembly.
Sturdy, Reusable Packaging - Display holds 20 each of Ericson’s most popular plugs and connectors (1510-P & 1610-C) in clear bags. The rack also comes with a 2-sided header card with space for pricing. Display on counter or hang on the wall.
Quick and Easy Set-Up - Take the rack out of the box, slide the header card in place, hang your plugs & connectors and it’s done
The innovative merchandising tool from Ericson Manufacturing Company.
Products that Sell -
Each PowerPak tube holds an Ericson 15A/120V Straight blade Perma-Grip™ Plug (1510-PG) and Connector (1610-CG) that feature the exclusive safety compression cord grip that eliminates "pinching" of the cord caused by screw-down type cable clamps and provides quick field assembly because there are no cable clamp screws to tighten.
Sturdy, Reusable Packaging - Display holds 25 transparent PowerPak™ tubes that clearly display the product inside and can be used by your customer to store their "odds-n-ends"
Quick and Easy Set-Up - Corrugated cardboard display pulls easily from shipping carton and is ...
(2) The innovative merchandising tool from Ericson Manufacturing Company.
Products that Sell -
Each Premium PowerPak tube holds an Ericson 15A/120V Straight blade Perma-Tite® Plug (1510-PW6P) and Connector (1610-CW6P) that feature the exclusive safety
compression cord grip that eliminates "pinching" of the cord. Super watertight sealing rings ensure all weather use.
Sturdy, Reusable Packaging - Display holds 12 transparent PowerPak Premium tubes that clearly display the product inside and can be used by your customer to store their "odds-n-ends".
Quick and Easy Set-Up - Corrugated cardboard display pulls easily from shipping carton and is ready to display on your countertop - No Assembly ...
