Construction Lighting

• Meets NEC 2005 and 2008 requirements
• UL Listed, suitable for damp locations
• 250 and 400 Watt versions
• High light output & long lamp life provide cost effective & low maintenance operation
• Compact size with balanced construction provides for easy handling
• Heavy-duty formed steel enclosure with yellow powder-coated finish
• Open-air ballast for cooler operation
• Multi-Tap ballast : 120V, 208V, 240V, 277V : Factory wired at 120V
• 6 ft. power cord #18/3 SJTOW with NEMA 5-15, 120V, 15 Amp plug provided
• Exclusive - Ericson offers models with secondary "daisy chain"  output cords in 1, 25 and 50 ft secondary ...
  
  

• Meets OSHA construction site requirements - 1926.405 (a) (2) (ii) (E & F)
• Meets NEC requirements for temporary lighting - article 590.4 (F).
• Designed for applications that require rapid set-up/ tear-down and an economy Construction lighting.
• Easy relamping with non-conductive, snap-open cage guard.
• Built-in hanger for easy installation with messenger cable or hooks.
• Accommodates one Type A-19 or one Type A-23 Lamp per socket max. 150 W.

• Meets OSHA construction site requirements - 1926.405 (a) (2) (ii) (E & F).
• Meets NEC requirements for temporary lighting - 525.21 (B), 527.4 (F), 527.4 (H).
• Designed for applications that require rapid set-up/tear-down and an economy Construction lighting.
• Full threaded screwshell to ensure proper contact.
• Easy relamping with non-conductive, snap-open cage guard.
• Built-in hanger for easy installation with messenger cable or hooks.
• Standard models supplied with 15 Amp, 2-wire straight-blade (NEMA 1-15) plug.

• Meets OSHA construction site requirements - 1926.405 (a) (2) (ii) (E & F).
• Meets NEC requirements for temporary lighting - 525.21 (B), 527.4 (F), 527.4 (H).
• UL Listed to UL1088 (1 March 07)
• Designed for applications that require rapid set-up/tear-down and a 3-wire stringlight.
• Full threaded screwshell to ensure proper contact.
• Available with non-conductive, snap-open cage guard grounded wire guard or clear rain guards.
• Built-in hanger for easy installation with messenger cable or hooks.
• Units come standard with Extra-Hard-Usage ST cord in 50 ft. and 100 ft. lengths.
• Construction lighting come standard with Ericson’s molded plugs and connectors.
• Heavy Duty sockets handle up to ...
  
  

  Search 28 Items

• UL Listed and CSA Certified.
• UL Listed to UL1088 (1 March 07)
• Meets OSHA construction site requirements - 1926.405 (a) (2) (ii) (E & F).
• Meets NEC requirements for temporary lighting - 525.21 (B), 527.4 (F), 527.4 (H).
• Designed for demanding industrial applications.
• Full threaded screwshell to ensure proper contact.
• Available with non-conductive, rain-guard or wire guard.
• Built-in hanger for easy installation with messenger cable or hooks.
• Units come standard with Extra-Hard-Usage SEOW cord in 50 ft. and 100 ft. lengths.
• Construction lighting come standard with Ericson’s Perma-Tite® plugs and connectors.
• Heavy Duty sockets handle up to 150 Watts per ...
  
  

• Heavy-duty plating provides maximum corrosion resistance.
• Constructed of heavy-gauge steel.
• Available with Vinyl coating.
• Fits 1 1/2 and 1 3/4 inch diameter molded sockets.
  
  

• Fits E-Lite and heavy duty style stringlights.
• Meets OSHA requirements for temporary lighting
• One-piece molded high-impact polycarbonate.
• Prevents accidental contact with bulb.
• Transparent to let light shine through while protecting bulb from jobsite debris and moisture.
• Built-in vents dissipate heat and allow air-flow around bulb for cooling.
• Matching polycarbonate end-cap available to provide complete bulb protection.
• Transparent water clear.
• Match collar diameter to correct molded sockets.

• High Temp material for use up to 600°F (315.5°C)
• Can be used with Ericson’s plated, vinyl-coated & plastic lattice guards. Not recommended for use with 214 or 212 RainGuard®
• Side cutouts provided for use with metal grounding tabs.
• Sold in 10 piece bags

Keeps Electrical contacts Dry & Clean.

Custom Stringlights are easy:

1. Download the Custom Stringlight and PowerDrop String Configurator (pdf) to design your specific needs.  Spacing of drops and sockets, colors, plug and connector ends and lengths are just some of the choices you can customize.

2. Find your local distributor or contact your local Factory Rep and send in the completed form for a quote.

or

Download the pdf form to help design your custom assembly and use the online fill-in form and submit.   The information will be automatically routed to your local Rep for followup and ...