125/250V 50 Amp 4W cordsets for Oscar box series. 50 Amp receptacle (SR-50) is a ready to install in a panel with 24 inch #6AWG wires prewired into the CS6369 4W receptacle under an all weather flip cover. Mounting nipple and lock nuts included.
50 Amp cordsets come in SOW and STW grade cords
Standard with CS 6365-P plug (male) ends and CS6364-C (female) connector ends
Ericson’s Safety yellow extension cords feature a lighted connector* that illuminates when there is power present. The light is visible through the clear molded connector end of the cord. The single-tap (NEMA 5-15 and L5-20) and Tri-tap (5-15) extension cords are made from Heavy-Duty #12/3 SJTW cable and are available in 50 ft. and 100 ft. lengths. Great for contractors. Each extension cord is packaged in a full-color cardboard sleeve which makes them ideal for merchandising.
* L5-20 Locking cordsets (PN 123BL & 123DL) do not have lighted ends. Molded black ends only.
Ericson "Y" cordsets offer the flexibility of two outlets from one source so you can keep two tools plugged in cutting down on receptacles required on the jobsite. Made from heavy-duty #12/3 STW 600V Hard Service yellow cable with molded-on plug, connector and Y-junction. Works with GFCI protected circuits. Lighted ends indicate power on some models. Straight 5-15 and locking L5-20 available.
Ericson manufacturers the highest quality molded industrial strength "Y" and "W" cordsets to help divide power on the jobsite for increased capabilities with temporary power distribution.
Provides multiple outlets from a single power source.
Available in "Y" and "W" configurations.
Manufactured using heavy-duty SEOW cord.
Standard models available with 18" primary and secondary.
Available with Ericson's Perma-Link, Perma-Grip or Perma-Tite2 (Extreme Conditions) plugs and connectors.
Custom configurations available with your choice of primary length, secondary length and plug/ connectors.
(4) Protect expensive cables from foot-traffic and equipment damage while eliminating tripping hazards caused by cables with Ericson's CP5 Series Cable Protectors. Made from UV Stabilized Polyurethane, for its resilience, hardness and impact resistance for demanding environments.
Low-profile cable duct lays flat and provides an economical means of supplying power where needed.
Helps to eliminate hazards of unsafe extension cord strung over floor. Hugs the floor, protects against tripping.
Facilitates any possible arrangement of desks, machines and equipment to produce the most efficient use of available space.
Safe, moisture resistant, non-conductive and fire resistant.
Durable, highly resistant to abrasion, withstands heavy traffic, even with repeated passes of wheeled equipment.
Preassembled cable duct is furnished with duplex (U-Ground) receptacle wired to No. 16/3 conductor cord. Two foot pigtail with right angle plug for connecting to wall outlet.
